Home Forum The Makers Workshop 3D Print talk ORION DELTA OWNERS

This topic contains 5 replies, has 1 voice, and was last updated by  Andrew – Gath Sports 4 years, 11 months ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #1489

    Trevor Harrington
    Participant

    Eyup,
    Are there any other Orion Delta owners out there?
    I am having problems and need assistance.
    I am dealing with Seemecnc regarding my issues but emails are very slow coming which is adding to my frustration.

    cheers

    Trevor

    #2021

    Hi

    I am interested in getting the Orion
    Can you tell me where you got yours from?
    Did you go directly to Seemecnc?

    Thanks
    Andrew

    #2022

    Trevor Harrington
    Participant

    Andrew – Gath Sports, post: 2497, member: 711 wrote: Hi

    I am interested in getting the Orion
    Can you tell me where you got yours from?
    Did you go directly to Seemecnc?

    Thanks
    Andrew

    #2023

    Trevor Harrington
    Participant

    Eyup Andrew
    I got mine direct from SEEME CNC.
    I am having problems with the machine but its no fault of the machine.
    The machine I believe is fine but at present I am having difficulties getting the ABS to stick to the glass.
    Hope that helps.
    You could come and view mine if you are of a mind to do so.

    cheers

    Trevor

    #2025

    Andrew-MOAMind
    Participant

    What is the difference between the Rostock and the Orion?
    Would you recommend one of these deltas over a prusa i3?

    #2026

    Trevor Harrington, post: 2499, member: 302 wrote: Eyup Andrew
    I got mine direct from SEEME CNC.
    I am having problems with the machine but its no fault of the machine.
    The machine I believe is fine but at present I am having difficulties getting the ABS to stick to the glass.
    Hope that helps.
    You could come and view mine if you are of a mind to do so.

    cheers

    Trevor

    I can’t find it right now but I have seen a you tube video of the Orion where the person testing had the same problem. He found the answer either in the instructions or on the seeme website
    The solution was to rub glue stick on the glass before starting the print (UHU glue would do)
    I thought this was a great feature as he did not have to print a support raft under the model and the clean that up after. Instead the print model just easily came off the glass

    If I can find the video I will let you know

    I would like to see your printer but I live in Margaret River so it will have to wait till I can get up to Perth sometime

    Andrew

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.