Home Forum The Makers Workshop Open Projects Gantry system

This topic contains 1 reply, has 1 voice, and was last updated by  Andrew-MOAMind 5 years, 9 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #477
    Dwayne
    Dwayne
    Participant

    Revision 1 of the Gantry. Might need a larger diameter Gt2 Pulley to keep it off the V-slot a bit more. Only took about 15minutes to get together after printing the brackets. Anyone want to give it a test run???

    Utilising the new V-slot that should be on sale soon at the openlab. V-slot is slight variation to the standard t-slot. Just has a nicely machined groove on the inside to allow the use of the delrin wheels. Nothing sticks out which I like.

    [USER=29]Andrew-MOAMind[/USER] this is the v-slot mate.

    #539

    Andrew-MOAMind
    Participant

    Colour me impressed.

    It looks like it could take a decent load, i would be keen to see a Go-Pro mounted on there with some time lapse work.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.