Home Forum Buy and Sell 2.2Kw Spindle and VFD for sale

This topic contains 2 replies, has 1 voice, and was last updated by Dwayne Dwayne 5 years ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #1976
    Dwayne
    Dwayne
    Participant

    SPINDLE

    • Power: 2.2KW
    • Voltage: AC 220V (must be used with a VFD)
    • Current: 10A
    • RPM: 24,000/m
    • Clamping: ER20-A
    • Frequency: 400Hz max
    • Vibration: 0.01mm
    • Accuracy: 0.025mm
    • Cooling: water cooled
    • Size 80mm(diameter) * 216mm (length)
    • Case: Stainless steel 304
    • Intake/outlet: aluminum
    • Power connector: GX16 water proof (1,2,3,4) = (U,V,W) where 4 =Ground
    • Inlet and Outlet size: 7.3mm (O.D)

    VFD
    2.2KW 220V 3 phases Variable Frequency Drive/ Power supply for CNC Spindle
    Specification:

    • Type: Single or 3 phases input, 3 phase output
    • Input: 180V~240V, 50Hz/60Hz
    • Power: 2.2KW, 10A, 3HP
    • Frequency: 0.1~ 400.00HZ
    • Accuracy: 0.1%
    • Resolution: 0.01Hz
    • Display: 5 digit Digital Display

    MAKE AN OFFER – UNIT IS SURPLUS TO NEEDS.
    Paid around the $400 mark, all gear is brand new in boxes never used.

    #1982

    Nick Witham
    Member

    Got any pics?
    Is it the same as the ones on Ebay?

    #1986
    Dwayne
    Dwayne
    Participant

    I did not get it from Ebay, but yea probably similar.

    Attached files

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.